• reading track 3 (ISO) for stripe debit cards and track 2 (ISO) for stripe credit cards or Access Controls.
• operating cycles: 200.000
• output: relay N.O. or N.C., 1s lenght
• visual interface: leds or 4x20 characters LCD
• thermostat and heating element to avoid moisture condensation and to operate at low temperature
• front case: anticorodal, electronic devices protected by water proof steel cover
• power requirements: 12 V DC +/- 15% / 40 mA (160 mA with thermostat) or 290mA depending on the model
• operating temperature range: -20 °C / +50 °C
• relative humidity: max 90% without condensation

Access Control ‘Stand Alone’ SE 9030
Badge reader ABR95 Master or Slave, for magnetic stripe cards (hand-operated) or for proximity cards, able to be connected to electric locks or motorised doors.
The reader ABR95 Master controls the entry of up to 1000 users into a protected area, and, combined with badge readers ABR95 Slave, controls the entry into several protected areas.
Week days and five intervals (the same for every day) may be programmed for authorized access.
The readers ABR95 Slave operate autonomously, but subordinated to the ABR Master for the configuration.
One of the five intervals can be associated to each user.
One interval can be associated to the door controlled by one of the ABR, with priority level over the user’s interval.
Therefore a user is authorized to enter into a protected area only during the interval associated to him and according to the interval associated to the door.
The badge reader ABR95 Master checks the Slaves for correct operation of the serial communication.